русский

english

中文

phone: 86-13505225915

products
hose reel
location:home - products - hose reel
prev
next

jp90/300 mobile sprinkler machine-凯发k8娱乐app下载苹果端

time:2015-6-5 11:47:21
i. capstan type sprinkling machine

i) product introduction

jp series capstan type sprinkling machine is a sprinkling device that winds the traction pe pipe around the capstan, and drives the water turbine to rotate with the sprinkling pressure water. then it drives the capstan to rotate via the transmission device, and pulls the sprinkler wagon to move and spray freely. it has advantages such as convenient to move, simple operation, labor-saving and time-saving, irrigation with high precision, good water-saving effect, strong adaptability and so on, which can effectively provide crops the water needed and increase the yield.

jp series capstan type sprinkling machine can not only irrigate large areas of farmland, but also can control the water flow according to the size of the amount of the water sprayed, to meet the different requirements of users on sprinkling water amount. it is the optimal choice of water-saving irrigation on farmland. at the same time, it also applies to the power plant, port, sports field, urban green areas and other areas that require dust free sprinkling operations.

ⅱ)working principle

jp series capstan type sprinkling machine adopts the vortex type power drive system which is easy to operate and durable. it is uniquely designed with large section and low pressure, which enables it to reach a higher collecting rate even at a very much lower flow rate. the rotary speed of the water turbine leads from the vortex axle, into the reducer via a two-speed belt drive device. after the speed is being reduced, a powerful torque is produced via the transmission of chain to drive the capstan to rotate, so as to realize the automatic collecting of the pe pipe. meanwhile, the high pressure water that outflows from the water turbine is directly transmitted to the sprinkler head via pe pipe, and the sprinkler head has the high pressure water evenly sprayed upon the crops, scattered into small droplets and fallen evenly. the sprinkling operations continue with the movement of the pe pipe. the adjustable tongue plate is installed in the inlet elbow of the water turbine. the opening of the tongue plate can adjust the flow lashed on the blades of the water turbine, so that the speed of the axle of the water turbine also changes, along with the movement speed of the pe pipe, so as to achieve the purpose of different precipitation depth. the shaft of the adjustable tongue plate is connected through the ball joint and a laminated compensation mechanism. with the change of the effective diameter of the winch and the friction resistance of the pe pipe when the sprinkling machine is at work, the laminated compensation rod of the pe pipe automatically adjust the opening degree of the adjustable tongue plate, so as to ensure the recovery speed of pe pipe and maintain the constant speed in winding, so as to realize the purpose of even spraying with automatic adjustment on speed.

the drive system and principle of the jp series capstan type sprinkling machine as shown in figure.

    jp series reel type sprinkling machine is the kind of sprinkling device that winds the traction pe pipe around the capstan, and uses the sprinkling pressure to drive the rotation of the water turbine, then pulls the sprinkler wagon to move and spray freely with the speed transmission device to drive the rotation of the capstan. it has advantages on convenient movement, easy operation, labor- consuming and time-consuming, irrigation with high precision, good water-saving effect, strong adaptability, etc. it is the water-saving irrigation equipment developed successfully with introduced foreign advanced technology, enjoying the international advanced level. it mainly consists the axial flow driving device of water turbine, multiple functional gearbox, pe pipe, guiding device, pressure gauge, slewing support, speed compensation mechanism, accurate speed control device, pocket type liquid crystal display electronic tachometer instrument (user selected), automatic parking safety device, automatic pipe device, the sprinkling driving track with adjustable thread and the thread of the host machine can be adjusted by the thread. the average rated water volume per hour of each machine can reach more than 30 tons, with the maximum water flow up to 50 tons per hour; the entrance pressure is 0.35 - 1.0mpa with even recovery rate and the adjusting speed range of 8-145m/h; the average service life of the machine is 30 years; the index of the sprinkling uniformity and atomizing intensity meet the requirements of the national standard gb85 - 85.

pe pipe of special trait: it is the product of latest technology. after durable test in hainan, heilongjiang and other places,the service span is over 30 years under ambient temperature of 40 degrees above zero to 35 degrees below zero. the wall thickness is more than 6.8 mm. with test, the bursting pressure is more than 2.0mpa, he tensile strength more than 16.5mpa, the elongation at break more than 400%, and abrasion less than 20mg.

spray gun with single nozzle: it adopts the vertical rocker type structure or vortex rod type structure, and the main material is aluminum alloy, stainless steel and hard plastic; it is with beautiful appearance, and with stable and reliable operation.

rack and capstan: it adopts the 16mn alloy steel plate material cut by cnc laser and weld with the protection of co2 gas, strong and durable, hot-dipped galvanizing process can ensure the use of more than 30 years with no rust. it is set up with the ground support at the traction area, which can rapidly fix the chassis and maintain the stability of the whole machine. the machine frame is flexible, and each operation point can be sprayed with 180 degrees in two directions or multiple directions. it is convenient on adjustment and maintenance.

   the sprinkler wagon can be automatically recovered in the operation. and it can be automatically lifted to the transport position at the end of each irrigation. the brake system is automatically shut down by the influence of the connecting rod. the key parts are made of stainless steel, and the sprinkler wagon adopts the combined symmetrical two-wheeled structure. the water supply equipment is divided into well use submersible electric pump, diesel engine and electric sprinkler pump (user selected).

ⅳ) the main components of the reel type sprinkling machine:

1.water turbine

the water turbine is the heart part of the whole machine, installed at the stream position of the reel. it is the motive power driving system of the unit for normal function. meanwhile, it can regulate the flow and ensure the recovery of the pe pipe with even speed.

the axial flow water turbine is composed of the volute and the turbine. the turbine uses the grade 304 stainless steel plate to press the bending. after weld with the stainless steel welding rod using special tool into shape, and then processed with the numerical control lathe. the volute is molded into shape with special steel die using high strength aluminum alloy, and then processed by the lathe, milling machine and drilling machine in accordance with the drawings. the shaft is sealed with mechanical seal, and has advantages on accessible to sewage and high efficiency, low pressure needed to start the water turbine, well sealed in all sides and long service span,etc. the outlet of the water turbine is installed with adjustable tongue plate, which enables to realize the speed regulation with no grades at the outlet and reel pipe and ensures the recovery with even speed.

2. multiple functional transmission device

multiple functional transmission device is the control system of the whole unit. the system can realize the clutch, brake, variable speed, quick recovery and safe recovery of the transmission system. the multiple functional transmission device can achieve the two-level speed variation by itself, also it can achieve two-level speed variation by changing the belt wheel, so the transmission device can achieve four-level speed variation. the system is compact in structure, simple in operation, reliable, flexible, and the operating handle can achieve speed variation, clutch and brake. at the same time it can automatically control the handle through the connecting rod system. when the sprinkling wagon returns to the end, it controls the handle by the connecting rod to achieve the transmission system automatically stops working and brakes.

3.guiding device

the key part is the guiding rod which adopts the automatic positive and negative "8" word screw guiding system. the thread form uses the rectangular screw thread, and the joint of the positive and negative thread is smoothly transitioned. "8" word screw is processed with the milling machine specially used for"8" word. the surface of the guiding rod is processed with quenching treatment to improve its wear resistance. it can effectively ensure the reliability of reversing, and guarantee the pe pipe is safely and orderly arranged on the capstan. and the guide walks evenly without being stuck, completely solving the reversing difficulty of the guiding mechanism, thus improving the precision of the pe pipe alignment.

4.turntable

it uses the turntable specified for automobile. it can freely choose the spraying direction within 270 degrees after pulling off the turntable positioning pin and turning the reel. after the spraying direction is determined, insert the positioning pin into the positioning hole and fix the turntable.
    
5.pe water pipe

it is the new high-tech product with many years of improved experiments through the use of foreign formula and he3470 raw materials. with durable test in hainan, heilongjiang and inner mongolia and other places, its service span is over 30 years under ambient temperature -30℃~ 40℃. the pe pipe is made of imported raw materials that is anti-aging and anti corrosion, enjoying international advanced technical index. the wall thickness is more than 6.8mm. with test, the bursting pressure is more than 2.0mpa, the tensile strength more than 16.5mpa, the elongation at break more than 400%, and the abrasion less than 20mg.

6.automatic speed adjusting device
 
the device adjusts the opening degree of the separation tongue of the water turbine through a set of connecting rod mechanism. it realizes the speed variation with no grade of the water turbine and ensures the pe pipe winding on the reel safely and orderly between each layer, so as to ensure the even recovery speed of the sprinkler wagon and realize the even spray of the machine.

7.sprinkler wagon

spray gun: it sprinkles evenly, rotates flexibly, and can spray with rotation of 360 degrees.

tire: it has double tire, and the distance in between can be adjusted according to the structure of the traveling crane. the width of the sprinkling wagon can be adjusted according to the row spacing of the crops.

balance mechanism: it ensures the automatic adjustment of the spraying angle and the balance of the traveling crane on the uneven ground. the overall lift and fall of the traveling crane is convenient, automatically lifted to the transport position, without any other operations.

the height from the ground is up to 1.5 meters, and can be customized according to the actual height of the tall pole crops. it will not do damage to the growing crops. the thread can be arbitrarily regulated within 1.3-2.5 meters.

8.rack and structural parts:

it adopts the 16mn alloy steel plate material cut by cnc laser, processes bending with numerical control bending machine, and operates welding with the protection of co2 gas, strong and durable, hot-dipped galvanizing process can ensure the use of more than 30 years with no rust. it is set up with the ground support at the traction area, which can rapidly fix the chassis and maintain the stability of the whole machine. the machine frame is flexible, and each operation point can be sprayed with 180 degrees in two directions or multiple directions. it is convenient on adjustment and maintenance.

9.reel assembly:

it adopts the steel plate cut by the numerical control laser, processes bending with numerical control bending machine, and operates welding with the protection of co2 gas. the outside of the reel is installed with the fan-shaped anti distortion baffle, and is welded with the reel. the constant recovery rate of the reel can ensure the automatic arrangement of the pe pipe, and it can automatically stop the car at the pipe failure.

10.chassis rack:

rigid support: it is welded with hot-dipped galvanized 16mn alloy steel plate, strong and durable. it is installed with the ground support at the traction area. strong anchor pile and jack fix the chassis rapidly with effort saving, to ensure the machine body stable under the powerful force of irrigation. 

rotary support: to maintain the flexibility of rotation under the total load.

11.water supply connection pipe:

the standard configuration is equipped with automatic closing valve or safety valve.it is installed with a quick connector at both ends, making it easy to connect with the inlet pipe of the water turbine.

it is equipped with the water pressure gauge which reads intuitively.

it is equipped with speed compensation mechanism, and equipped with precise speed adjustment device. the regulation range of the recovery speed is within 8-145m/h.

this machine can perform automatic spraying, and automatic recovery untended, equipped with precise speed adjustment device, automatic stop safety device, automatic drain pipe mechanism. it can automatically stop after spraying ends, and lift the sprinkler wagon automatically, which greatly improves the working efficiency.

ⅴ)performance description


project name
technical requirements, performance description

overall parameter
the recovery speed is even with the adjustment range 8-145 m/h. climbing ability is above 25% , the average service life is over 30 years, and it requires a simple maintenance. the index of the sprinkling uniformity and atomizing intensity meet the requirements of the national standard gb85 - 85.it is equipped with speed compensation mechanism,also with  accurate speed control device, automatic parking safety device and automatic pipe device. all connecting parts are welded with the protection of co2 gas. it is hot-dipped galvanized and possesses anti-corrosion. 

sprinkling wagon
spray gun
it sprinkles evenly and rotates flexibly.

it has double tire, and the distance in between can be adjusted according to the structure of the traveling crane. 

balance mechanism
it ensures the automatic adjustment of the spraying angle and the balance of the traveling crane on the uneven ground. the overall lift and fall of the traveling crane is convenient, automatically lifted to the transport position, without any other operations.

pe water pipe

imported high density pe pipe has advantages including good flexibility, impact resistance, anti-aging characteristics, abrasion resistance, long service life,etc.

chassis frame

rigid support
it is welded with hot-dipped galvanized 16mn alloy steel plate, strong and durable. it is installed with the ground support at the traction area. strong anchor pile and jack fix the chassis rapidly with effort saving, to ensure the machine body stable under the powerful force of irrigation. 

rotary support
maintain the flexibility of rotation under the total load.

traveling tire
specification 7.00—9/5.00s.
the outside of the reel is installed with the fan-shaped anti distortion baffle, and is welded with the reel. the constant recovery rate of the reel can ensure the automatic arrangement of the pe pipe, and it can automatically stop the car at the pipe failure.

water turbine
low pressure loss, wide flow range and large torque power ensure a strong recovery power and high recovery speed even in the case of small water flow.
transmission device
double speed transmission device can be reliably connected with the recovery speed and the irrigation intensity effectively for adjustment.

water supply connection pipe
the standard configuration is equipped with automatic closing valve or safety valve.it is installed with a quick connector at both ends, making it easy to connect with the inlet pipe of the water turbine.

ⅵ)use scope and use conditions

the machine is used for irrigation of big farmland crops. it can adjust the irrigation intensity and flow according to different crops, and can also be used for dust proof and dry reduction in power plants, coal harbor and carpentry factory.

for crops like seedling and vegetables which require small strike force, it can adopt multiple nozzle truss structure. it has the advantages of low working pressure, good atomizing effect, strong wind resistance, etc.

the water quality is required to be clear water at room temperature with the ph value of 6.5 - 8.5, no corrosion, and the solid content less than 0.01%.


up:
next:
customer service
feedback phone:

86-13505225915

qq